| PART |
Description |
Maker |
| KDZTR6.2B |
Small power mold type.
|
Rohm
|
| PS21342-N |
DIP - IPM
MITSUBISHI SEMICONDUCTOR Power Module TRANSFER-MOLD TYPE INSULATED TYPE
MITSUBISHI SEMICONDUCTOR TRANSFER-MOLD TYPE INSULATED TYPE
Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Corporation
Mitsubishi Electric Semiconductor
Powerex Power Semiconductors
|
| 5P4J 5P6J 5P6J-Z 596J 5P4J-Z |
5A mold SCR
5 A SMALL MOLD THYRISTOR
|
NEC Electronics
NEC[NEC]
NEC Corp.
|
| NNCD5.6LH NNCD6.2LH NNCD6.8LH |
2 W, UNIDIRECTIONAL, 4 ELEMENT, SILICON, TVS DIODE
LOW CAPACITANCE TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODES QUARTO TYPE: COMMON ANODE 5-PIN SUPER SMALL MINI MOLD 低电容式静电放电噪声裁剪二极管季刊类型：共阳引脚超小微型模具
|
NEC, Corp.
NEC Corp.
|
| NNCD68PL NNCD6.8PL |
5-PIN SUPER SMALL MINI MOLD FLAT LEAD TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE QUAD TYPE: COMMON ANODE 5针超小微型模具扁平引线式静电放电二极管噪声裁剪四型：共阳
ESD noise clipping diode 5pin XSOF(flat-lead type)
|
NEC, Corp.
NEC[NEC]
|
| TDZTR15 TDZTR24 TDZTR20 |
Small mold type. (TUMD2), High reliability.
Zener diode
|
Rohm
|
| NNCD6.8RL |
ESD noise clipping diode 5-pin XSOF (flat lead type) low capactance
5-PIN SUPER SMALL MINI MOLD (FLAT LEAD TYPE) ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE (QUAD TYPE: COMMON ANODE) 5针超小微型模具（扁平引脚型）静电放电噪声裁剪二极管（四型：共阳极
|
NEC[NEC]
NEC Corp.
NEC, Corp.
|
| 03P2J 03P4J 03P5J |
ALL DIFFUSED TYPE SCR POWER MINI MOLD
|
NEC Corp.
NEC[NEC]
|
| 03P4J |
(03PxJ) ALL DIFFUSED TYPE SCR POWER MINI MOLD
|
NEC
|
| NNCD6.8RH NNCD6.8RH-T1 NNCD6.8RH-T2 |
ESD noise clipping diode 5pin SC-88A low capacitance
LOW CAPACITANCE TYPE ELECTROSTATIC DISCHARGE NOISE CLIPPING DIODE (QUARTO TYPE: COMMON ANODE) 5-PIN SUPER SMALL MINI MOLD 低电容式静电放电噪声裁剪二极管（四开型：共阳极）5引脚超小微型模具
|
NEC[NEC]
NEC Corp.
NEC, Corp.
|
| RPI-124 |
Sensors > Photointerrupters > Linear Phototransistor output
PHOTO INTERRUPTER, DOUBLE-LAYER MOLD TYPE
Photo interrupter/ double-layer mold type
|
Rohm
|
